Aluma Error Codes
-
Handpiece iButton Chip Failure
What it meansThe iButton chip in the handpiece is not communicating or is corrupted.
Possible causes
["Corrupted iButton chip data","Faulty chip connection","Chip memory failure"]
Solutions
iButton chip reprogramming and reset required.
-
iButton Initialization Failed
What it means
The handpiece iButton chip failed to initialize.
Possible causes
["Corrupted chip data","Defective iButton chip","Communication error"]
Solutions
Reprogram or replace iButton chip.
-
IPL Lamp Failure
What it means
The IPL handpiece lamp is not functioning properly.
Possible causes
["Lamp end of life","Lamp ignition failure","Electrical connection issue"]
Solutions
IPL handpiece refurbishment with new lamp required.
-
Water Flow Switch Error
What it means
The water flow sensor is not detecting proper coolant circulation.
Possible causes
["Obstructed water flow in handpiece or machine","Faulty flow switch sensor","Water pump failure"]
Solutions
Check for blockages, clean system, or replace flow switch/pump.
-
Laser Diode Over-Current
What it means
Laser diodes are drawing excessive current.
Possible causes
["Diode wear from extended use","Diode degradation","Driver circuit fault"]
Solutions
Handpiece refurbishment and diode replacement may be necessary.
Do you need expert help with this error?
Candela Laser Error Codes
-
What it means
The power supply is unable to charge within the expected timeframe.
Possible causes
["High Voltage Power Supply (HVPS) failure","Charge circuit malfunction","Power delivery issue"]
Solutions
Contact a certified technician for HVPS testing and potential replacement.
-
What it means
The power supply output is outside acceptable tolerance ranges.
Possible causes
["HVPS voltage regulation failure","Capacitor degradation","Power circuit fault"]
Solutions
Requires professional HVPS diagnostics and replacement.
-
What it means
The laser system calibration has drifted out of specification.
Possible causes
["Dirty or damaged optical windows/lenses","Laser head misalignment","Worn optical components","Power input/output issues"]
Solutions
Professional laser technician must perform recalibration and optical inspection.
-
What it means
Laser transmission has dropped below 70-75%, indicating optical degradation.
Possible causes
["Dirty optical windows","Burnt or damaged lenses","Contaminated optical path","Crystal degradation"]
Solutions
Clean optical components or replace damaged lenses. May require professional service.
-
Laser Diode Over-Current
What it means
Laser diodes are drawing excessive current.
Possible causes
["Diode wear from extended use","Diode degradation","Driver circuit fault"]
Solutions
Handpiece refurbishment and diode replacement may be necessary.
Do you need expert help with this error?
Lumenis Laser Error Codes
-
What it means
The embedded computer board has a malfunctioning central processing unit.
Possible causes
"CPU corruption","Memory failure","Motherboard defect"
Solutions
Embedded computer board replacement required.
-
What it means
Laser diodes are drawing excessive current, indicating failure.
Possible causes
"Diode degradation from prolonged use","Diode burnout","Driver circuit fault"
Solutions
Handpiece refurbishment and diode replacement necessary.
-
What it means
Diodes inside the handpiece have weakened or failed.
Possible causes
"Extended use causing diode degradation","Thermal stress","Manufacturing defect"
Solutions
Handpiece refurbishment and diode replacement required.
-
What it means
Operating temperature is outside the calibrated range.
Possible causes
"Temperature sensor malfunction","Ambient temperature extremes","Cooling system failure"
Solutions
Recalibration or temperature sensor replacement may be needed.
-
What it means
Laser diodes are overheating beyond safe operating limits.
Possible causes
"Weak diodes nearing end of life","Poor water cooling","Temperature sensor failure"
Solutions
Check cooling system and schedule diode replacement.
Do you need expert help with this error?
Quanta Laser Error Codes
-
What it means
The embedded computer board has a malfunctioning central processing unit.
Possible causes
"CPU corruption","Memory failure","Motherboard defect"
Solutions
Embedded computer board replacement required.
-
What it means
Laser diodes are drawing excessive current, indicating failure.
Possible causes
"Diode degradation from prolonged use","Diode burnout","Driver circuit fault"
Solutions
Handpiece refurbishment and diode replacement necessary.
-
What it means
Diodes inside the handpiece have weakened or failed.
Possible causes
"Extended use causing diode degradation","Thermal stress","Manufacturing defect"
Solutions
Handpiece refurbishment and diode replacement required.
-
What it means
Operating temperature is outside the calibrated range.
Possible causes
"Temperature sensor malfunction","Ambient temperature extremes","Cooling system failure"
Solutions
Recalibration or temperature sensor replacement may be needed.
-
What it means
Laser diodes are overheating beyond safe operating limits.
Possible causes
"Weak diodes nearing end of life","Poor water cooling","Temperature sensor failure"
Solutions
Check cooling system and schedule diode replacement.
Do you need expert help with this error?